FAQs

Yes, the Keilton lighting control system retains all configuration settings and commissioning data even during complete power loss or electrical outages thanks to built-in non-volatile memory in the devices.

This memory persists in the configured data whether the power disruption is from:
*Temporary power outage
*Circuit breaker reset
*Device reboot/restart
*Full disconnect from power

When power is restored, the devices will resume operation in their last configured state. No re-programming or commissioning is required after an outage.

Some examples of data retained in non-volatile memory:
*Project bindings and topology
*Grouping and zones
*Sensor settings
*Schedules
*Scenes
*Device names
*Control behaviors

So you can have confidence that a power interruption will not reset or wipe out your configured system. The onboard non-volatile memory retains all commissioning data to withstand power cycling.