Yes, the IWS102 or any Keilton+autani Bluetooth switch can provide ON/OFF control to any device that is plugged into the controlled portion of the WF20R receptacle.
The steps to facilitate this are:
- Commission the IWS102 to same Zone as the WF20R is on.
- Create a Group and add both IWS102 and WF20R to same Group.
- Enable motion sensing for either Occupancy or Vacancy mode.
- Enable Linkage.
- Set desired time-outs for T1/T2.
- Set “hold time” equal to T1
When the ISW102 triggered, it will turn on the controlled receptacle of the WF20R and off after motion times out. User may also press the ON/OFF button on the IWS102 to turn on the receptacle.
